All solutions should be clear. If the ambient temperature is low, the solution may form precipitates and should not be used directly. It can be heated in a 37℃ water bath for a few minutes to restore clarity. It should be restored to room temperature before use.
Storing at low temperatures (4℃ or -20℃) can cause solution precipitation, affecting the effectiveness of use. Therefore, transportation and storage are carried out at room temperature (15℃ -25℃).
To avoid volatilization, oxidation, and pH changes caused by prolonged exposure of reagents to the air, each solution should be covered tightly in a timely manner after use.
Components
Component
Storage
DRK0101 50 Preps
DRK0102 100 Preps
DRK0103 200 Preps
Balance Buffer
RT
5 ml
10 ml
20 ml
Buffer DD
RT
40 ml
75 ml
150 ml
Buffer WB
RT
13 ml
25 ml
50 ml
Buffer EB
RT
10 ml
15 ml
15 ml
Adsorption column EC
RT
50
100
200
Collection tube (2ml)
RT
50
100
200
Description
In the presence of high dissociation salts, DNA fragments selectively adsorb onto the silica matrix membrane inside the centrifuge column. Through a series of rapid rinsing centrifugation steps, Buffer WB removes impurities such as primers, nucleotides, proteins, enzymes, etc. Finally, low salt, high pH Buffer EB elutes pure DNA from the silica matrix membrane.
Features
The silicon matrix membranes inside the centrifugal adsorption column are all made of specially designed adsorption membranes, with minimal differences in adsorption capacity between columns and good repeatability. Overcoming the drawback of unstable membrane quality in domestic reagent kits.
High quality buffer DD was used, which does not contain traditional buffer DD's sodium iodide and perchlorate, and does not inhibit downstream reactions such as enzyme digestion and cloning after recovery.
Buffer DD is modulated with phenol red to become a yellow color, which facilitates observation of sol effect and monitoring of pH changes to achieve optimal binding effect, greatly improving recovery efficiency.
The improved Buffer DD formula greatly enhances buffering capacity and stability, allowing pH to be buffered within the optimal binding range even with significant sample changes.
Fast and convenient, without the need for toxic reagents such as phenol and chloroform, and without the need for ethanol precipitation.